Page Comparison

...

\uD83D\uDCD8 Connecting Managed Printers on Mac Computers

Note

IMPORTANT

These instructions for Macs apply to new printers/copiers as they are replaced throughout the school. The instructions will still work for old devices, but using the driver listed to print to an old device may result in unpredictable printing issues. For this reason, it is recommended that Mac users wait until a new device has been installed before using these instructions to connect to it. For updates on replacements, see SON Printer Replacement Project.

This process is a little more involved than it is for Windows computers so please be sure to follow each step carefully

...

Note the name from the label on the printer you want to connect to and its model number. The name will be SON-MP###. The MP### is the portion you want to note.

...

.

Please use the Safari Web Browser
Click this link to download the setup file:
View file
name Popup.dmg
(note you must be connected to the VPN or Hopkins WiFi network for this link to work)
Open the Downloads Folder and select the Popup.dmg file you downloaded.
- NOTE: If you receive the warning message "App can't be opened because it is from an unidentified developer," control-click the application and choose “Open”
Open the "Popup" drive mounted to your desktop and install the "Popup.pkg"
Image Added
Select Continue on the "Introduction" and "Read Me" dialogue windows.
Select Install.
Provide Username and Password to local machine (or fingerprint authorization) if prompted.
Install/run this HP Printer Essentials software package
View file
name hp-printer-essentials-SE-5_19_0_1.pkg
(X67765 & X55745 drivers)

NOTE - If you normally print to MP002, MP007 or MP008, you should install this package instead if you want to utilize all the printer capabilities
View file
name hp-printer-essentials-UniPS-6_1_0_1.pkg
(E87760 drivers)
Provide Username and Password to local machine (or fingerprint authorization) if prompted.
Open System Settings > Preferences and click on the Printers & Scanners icon.
Click the Add Printer, Scanner, or Fax... button in the lower Right corner of the window.
If you see an Advanced icon on the toolbar , Image Added go to step 1315.
Hold down the control key down and click the space next to the Search bar. Then choose Customize Toolbar...
Image RemovedImage Added
Drag the Advanced icon to the toolbar and close the customization dialog. Note on some Macs, the Advanced icon might be two smaller gears.
Image RemovedImage Added
Click on the Advanced button icon.
In the Type: field, select Windows printer via spoolss Pharos Print Server.
In the URL: field, enter smbpopup://SONson-Printpharos.win.ad.jhu.edu/MP### (where MP### is the ID from step 1)
Be sure to type it correctly or consider copy and paste to avoid a mistake
SON-PrintAnywhere
- It is highly recommended that you copy and paste the entire URL above to avoid a typo. If you do, make sure you paste over the existing "popup://" value.
In the Name: field, enter MP### (where MP### is the ID from step 1) SON Print Anywhere
In the Use field, choose Select Software…
This brings up a windows where you can select the specific driver for this device. Enter the model in the filter/search box at the top. Use the table below to select the specific driver listed for this printer.
Choose HP Color LaserJet Flow X67765
NOTE - If you normally print to MP002, MP007, or MP008, choose HP Color MFP E877-40-50-60-70
Click the Add button
A screen enabling you to select additional printer features should appear. Refer to the table again below for the features you should select . Do NOT select/enable features not specifically listed or your printer may not function properly. Select the features listed and click that match the printer you will use most often. Note, if you intend to retrieve a job on a different model printer, be sure you do not specify any advanced features such as stapling or choosing a specific paper tray. Results will be unpredictable.
Click OK.